Riotoro CR500 MID, Installation Manual

Page: 23 / 40

Chapter 2 Ready, Setup, Go 21
CR500 Mid-Tower Case
Fan Mounting Points, and Water Cooling Support
The CR500 includes mounts for 120/140 mm fans. That can be added to
increase cooling capacity and/or for aesthetics reasons.
Front: 3x 120mm intake LED fan (1x 120mm Red LED included)
or 2x 140mm intake LED fan
Back: 1x 120mm exhaust (1x120mm fan w/o LED included)
Tips:
- you can replace the 120mm included fan on the front and use 2x 140mm fans instead.
Some of the fan mounts on the CR500 can also be used to mount Water
cooling radiators, the following are supported:
Front: Radiator supported: 240/280mm
Tips:
- Screws and rubber grommets are provided in the accessory box to allow you to
add optional fans and radiators.
- RIOTORO recommends Bifrost 120ti as a perfect water cooling companion for the CR500.