Riotoro CR500 MID, Installation Manual

Page: 24 / 40

22 Chapter 2 Ready, Setup, Go
150 mm
85 mm 175 mm
CR500 Mid-Tower Case
Install the Power Supply
The power supply unit (PSU) drive bay is located on the bottom of the case in a separate
compartment.
- Remove the thumb screws located on the opposite side of the motherboard area and then
install the PSU in the case PSU bay. The PSU fan should be facing the bottom of the case.
- Align the PSU and case mounting holes and attach the power supply to the case with the
provided PSU thumbscrews.
- Connect the relevant PSU cables to your motherboard and drives. (In larger Modular PSU’s
RIOTORO recommends to install the modular cables before installing the PSU into the
case.)