ENGLISH
Introduction
Thank you very much for choosing a high-quality RIOTORO product. This
manual includes a brief description of the specifications and technical details
of the power supplies which will give you a better idea of its performance and
characteristic will give you a better idea of its performance and characteristic.
Mechanical drawings and connector instructions will equally help you to
understand and implement your power supply better. The installation
instructions should help you install the unit into your case in an adequate
way. Precaution will update you on all important information regarding the
safety requirements of this unit. All questions that may arise while operating
your unit, are adequately answered in the trouble shooting segment.
Precaution
- Please do not plug out the AC power cord when the Power Supply is in
use, since even if done in a flash-like manner would cause damage to the
components.
- Please do not store or implement the switching power supply under high
humid or temperature conditions.
- When putting an ATX type switching power supply under testing condition
(Plug in alone/ not installed in a PC case), it must be connected to a "Load"
(e.g. HDD), before the switching power supply can be turned on
(the Fan starting to rotate) and DC power output will be in operation.
- If not authorized, do not unscrew, open or tamper with the power units
case for any reason what-so-ever!
Trouble shooting
If the Power Supply does not function normally, please check followings:
- Check if the AC inlet connector is firmly plugged into the power supply
receptacle. (be sure not to connect the power source)
- Make sure that the power connectors connect firmly to appropriate positions.
- Set the "I/0" switch to "0" status after the above checking and connect the
power supply and power source.
- Select the "I/0" switch to "I" status and turn on the computer. Check if it
can function normally.
If the power supply still does not function normally after the above checking,
please send the power supply back to your retailer or distributor.
Power supply installation
Please follow the steps for power supply installation:
1. If it is an auto-ranging power supply, the input AC voltage is 90Vac-135Vac /
180Vac-265Vac.
2. Position the power supply into PC chassis and secure it with screws.
3. Plug ATX 20+4-pin main power connector (a) into the 24-pin or 20-pin
connector onto the motherboard.
BUILDER EDITION PSU
