24 |
P a g e
5.
Locate the two 5/16” holes, one on each wing extension on both sides of the post-top dual header bracket. Drill 3/32” X
1-1/4” deep pilot holes at the center of the 5/16” holes into both inner and outer headers for all four post-top dual
header brackets. Locate pilot holes at the center of each 5/16” holes.
6.
Drive one ¼ x 1-1/4” Hex Lag Screw through each 5/16” hole into the pilot holes you drilled, using a 7/16” Socket and
Rachet driver. Drive screws into both inner and outer headers. Tighten down each screw.
7.
Repeat steps 5 and 6 for all four post-top dual header brackets.
WING
EXTENSIONS
TWOSCREWTHIS
SIDEALSO.
