1. Clear your site making
sure there are no
sharp objects where
you are going to pitch
your tent. Try to get a
site that is as flat as
possible. Spread out
the inner tent the
round door is located
at the front. The tent
is symmetrical.
2. Assemble the 2 pole
sections. (Pole A)
Ensure that the poles
are inserted fully into
the steel connectors.
3. Thread both A poles
through the pole
sleeves that run
diagonally across the
center of the tent.
Insert the ends of the
poles into the pins
located below each
pole sleeve. Attach
the c clips onto the
poles
STEPS 1 - 3
STEP 4
STEPS 5 - 6
4. Take the flysheet and
lay on the ground.
Thread the B pole
(marked with red)
through the pole
sleeves that run on
either side of the
main dome (also
marked in red). Insert
the ends of the poles
into the pins. Attach
the c clips onto the
poles
5. Attach the elastic
loops over the existing
inner pegs. Where
there is no inner peg,
peg the fly directly
into the ground
ensuring there is
significant space
between the inner and
the fly
6. It is recommended
that guy ropes are
pegged out at all
times and the
windows are opened
whenever possible to
allow adequate
ventilation. Try to
have guy ropes at 45º
angle to the ground .
A Poles
B Pole
B
(marked with
red)
45º
