Rioned flexJET, User Manual

Page: 52 / 78

01/18 48
If this is not the case it is not allowed to work with the transmitter.
Contact your supplier.
Technical specification :
Receiver:
Voltage : 8-38 Vdc
Fuse : 10 A (fast)(5*20mm) glass fuse integrat-
ed
Current consumption : 15 mA
Max. Output rated current : 4A (met 24 Vdc) per output
Cable length : 2.5 meters
IP classification : IP-68 (fully waterproof)
Transmitter : Range up to 350 meters
Operating Frequency : 868 MHz
fully waterproof : Integrated
Power Consumption Standby : 2 µA.
Power consumption during transmission : 5 mA (max.)
Replace Battery Indicator : When LED flashes slowly when transmit-
ting, battery
Battery type : 1 piece, 9V 600 mAh
Continuous battery life : 100 hour
Normal battery life : 2 years
Impact resistant : Tot 2 meter
IP classification : IP-65 (splash proof)
Change battery at transmitter:
Carefully open the casing so that the ribbon cable between the upper and lower
house is not damaged. Alternatively, you can disconnect the ribbon cable
through the upper part of connector vertically to contract, pushing the flat cable
is released. Now replace the battery. Plug ribbon cable back in and press the
connector down. Close the case, make sure the ribbon cable is not kinked.
Screw the cover back on.
7.15 Water circuit circulate
On the water tank, there are two connectors to connect the ends of the high-
pressure hoses to the fixed link. Using this option is for the prevention of freez-
ing of the water circuit.
Use:
1. Start the engine and let it idle.