Rioned flexJET, User Manual

Page: 49 / 78

01/18 45
7.12 Pulsator system
Purpose : With less water use, quicker to the stoppage.
Construction :
The high-pressure pump has three cylinders. By normal use the three cylinders
follows each other continuously. This gives a fluent volume stream. To stop one
stroke, you get a pulsating water stream.
Control :
1. Unlock the HP reel.
2. Do not let the engine idle.
3. Open or close the handle to start or stop the pulsator.
Use :
Use the pulsator system only to get quicker to the stoppage. Stop the pulsator
when you are to the stoppage.
Use the machine mentioned earlier in this user's manual.
If you have an electric pulsator the control is as follows:
- Switch to the right is on.
- Switch to the left is off.
7.13 Radio remote control
Purpose : To operate the high-pressure machine from a distance.
To operate the transmitter
Check before working with the transmitter if the emergency stop works well.
Proceed as follows:
Pump
Water tank
Engine/Pump
ompartment