42
Option Program Installation/Uninstallation
Uninstalling the option program
The procedure for uninstalling an option program from the VM-54 is as
follows.
1. Open the lid of the card slot and insert the program card.
2. While holding down the Install key, press the Power key to turn the
unit on. If an option program is installed, the uninstallation screen
appears.
To proceed with the uninstallation, press the Mode key. The option
program is uninstalled from the VM-54 and the program card be-
comes valid again. When the uninstallation process is complete, the
measurement screen appears again.
If you want to cancel the uninstallation, press the Menu key instead of
the Mode key at the uninstallation confi rmation screen. The normal
measurement screen will appear.
To remove the program card, turn power to the VM-54 off and then press
the lever in the card slot.
Card
VM-54
OK Mode Cancel Menu
Uninstallation confirmation screen
Sub display
load menu