31
Power-On/Off
Power-on
Hold down the Power key for about 1 to 2 seconds until the sub display shows
the power-on screen. When the screen appears, release the Power key.
After the initialization screen was shown, the measurement screen ap-
pears.
Note
By pressing the Cal key while the above initializa-
tion screen is shown, you can bring up the software
version display. Press the Cal key once more to go
to the measurement screen.
Level Range
X
Y
Z
Sub Display
Mode
X/Y/Z
Max Hold
Reset
Display
Menu
Light
Cal
Power
Install
Power key
VIBRATION METER
VM-54
RION CO.,LTD.
RION
Sub display screen during power-on
(initialization screen)