Rion NL-42, Interface Manual, Page: 56 / 72

48
Command
p1= “8h”
p1= “24h”
p1= “Manual” (user setting)
Request command Measurement Time Preset Auto?
Response data d1
Returned value Same as for setting command
Measurement Time Auto (Num)
Total measurement time of user setting on auto store (number)
Setting value when “Measurement Time Preset” command parameter
is “Manual” on auto store mode
Setting command Measurement Time Auto (Num), p1
Parameter p1= 1 to 59 (Time unit is s [second] or m [minute])
p1= 1 to 1000 (Time unit is h [hour])
Request command Measurement Time Auto (Num)?
Response data d1
Returned value Same as for setting command
Measurement Time Auto (Unit)
Total measurement time of user setting on auto store (unit)
Setting time unit when “Measurement Time Preset” command param-
eter is “Manual” on auto store mode
Setting command Measurement Time Auto (Unit), p1
Parameter p1= “s”
p1= “m”
p1= “h”
Request command Measurement Time Auto (Unit)?
Response data d1
Returned value Same as for setting command