Rion NL-42, Interface Manual, Page: 39 / 72

31
Command
Calibration
Calibration
Transition to calibration state
Setting command Calibration, p1
Parameter p1= “Off”
p1= “On”
Request command Calibration?
Response data d1
Returned value Same as for setting command
Cal Mode
Calibration mode
Setting calibration mode
Setting command Cal Mode, p1
Parameter p1= “Internal”
p1= “Acoustic”
Request command Cal Mode?
Response data d1
Returned value Same as for setting command
Cal Adjustment
Calibration adjustment
Adjusting calibration value
Setting command Cal Adjustment, p1
Parameter p1= “Minus”
p1= “Plus”
There is no request command