Rion NL-42, Interface Manual, Page: 50 / 72

42
Command
Output Level Range Lower
Output level range lower
Setting output level range lower
The value cannot be set the value of “Output Level Range Upper” or more
Setting command Output Level Range Lower, p1
Parameter p1= 20 to 80 (10 dB steps)
Request command Output Level Range Lower?
Response data d1
Returned value Same as for setting command
I/O
AC OUT
AC out
Setting AC output channel
Setting command AC OUT, p1
Parameter p1= “Off”
p1= “Main” (Inter lock)
p1= “A”
p1= “C”
p1= “Z”
Request command AC OUT?
Response data d1
Returned value Same as for setting command
DC OUT
DC out
Setting of DC output
Setting command DC OUT, p1
Parameter p1= “Off”
p1= “Main”
Request command DC OUT?
Response data d1
Returned value Same as for setting command