22
Rion GH30 Greenhouse Assembly Instructions
Assemble the Door (Hinged Door Model)
Assemble the profiles and connectors of the lower
portion of the door. Put the PN1 panel in place with
the plastic ID strip facing outwards.
Attach the DoorW1 connector opposite the 18D
hinge connectors.
Screw the Dow1 Lock Holder through the E2 profile
in the pin hole on the side of the DoorW1 connector.
Assemble the upper portion of the door. Put the
PN9W panel in place with the plastic ID strip facing
outwards.
Lock the door together with pins. You may now
remove the plastic ID strips.
Take the roll of GF sealer and divide it as shown.
Measure GF sealer for the edges of both panels.
Align the GF with the channels of the column profiles
with the double ridge facing the panels.
Push them in to seal the panel using the GT1 glazing
tool if needed.
Remove the pins from inner sides of the door where
shown.
Cut three pieces of DS Door Sealer and place in the
channel of the inside of the door.
Summary of Contents for GH30
Page 2: ...2003 Rion Ltd...
Page 27: ...25 Notes...
