5
Part 3 :
INSTALLATION
Part 2 :
SPECIFICATIONS
Item:
Seating Capacity
Spa Dimension
Water Capacity
Voltage
Heater
Massage Jet Pump
Filter Pump
Max. Heat Temperature
Spa Lid Material
Liner
Net Weight
Gross Weight
Package Dimensions
Test Certificate (Pump only)
Heating Efficiency (Ambient temperature is 68°F/20°C℃)
CSCHTRG29
4 Persons
70’’x 29’’ (180 x 74cm)
Up to water line indicators
115V 60Hz
1340W
500W
30W
104°F (40°C)
Polyester Laminated PVC+Synthetic leather
Polyester Laminated PVC
75lbs / 34kg c
85lbs / 38.5kg
27.5’’ x 21.5’’ x 23.5’’ / 69.5 x 55 x 60cm
CE/GS/CETL/ETL
1.5-2℃(°F) /hr
1. Site Selection
IMPORTANT: Before you position, inflate, and fill with water follow these instructions:
1. Place in an area more than 8.2 sq ft (2.5 sq mtrs.)
2. Place spa on a surface that supports more than
661lb/ft
2
(300 kg/
2
).
3. The spa must be on a clean level ground. If placed
on uneven ground the weight of the spa water
may cause the spa to become distorted; this is not
covered by the manufacturer’s warranty.
Clean surface
Level ground
Ensure no kinked
connectors
Fill the tub up to
the water lines
on both interior
sides of the spa to
ensure the spa is
level.
Place Thermal
Ground Sheet
under spa
X