11
Part 7
PORTABLE CONTROL UNIT FUNCTION
A.
Temperature Increase
Button
C.
Blower/Jet
Massage Button
B.
Temperature Decrease
Button
D.
Filter Button
E.
Heat Button
G.
Temperature Mode Button
F.
LED Display
Functions of the Spa Portable Control Unit
• LED Display: Once powered-up, the LED display will show the current water
temperature automatically.
• ‘Temperature Adjustment’ Buttons (A & B): Increase (A) Decrease (B). Pressing one
of the temperature adjustment buttons will cause the LED display to flash. When
it is flashing, you can set the desired temperature. The value will increase or decrease
by 1°F/ 1°C for each press. If you hold the button for 2 seconds, the values will
increase/decrease rapidly.
•
Temperature Adjustment Ranges: 86°F - 104°F/ 30°C - 39°C To lock the Portable
Control Unit, press (A) + (B) at the same time and hold them for 3 seconds. When the
spa is left unattended please be sure to lock the Portable Control Unit to avoid having
the settings changed. Unlock the Portable Control Unit by pressing (A) + (B) at same time
and holding for 3 seconds again.
•
‘Temperature Mode’ Button (G): Press this button to change from Celsius to Fahrenheit.
•
‘Jet Massage’ Button (C): Press this button to activate the Jet Massage system; when
activated a green indicator light turns on. It can be turned off by pressing it again.
NOTE:
• The massage system will stop automatically after 15 minutes of operation. Re-activate
the jet function by pressing the jet button again.
• When the filter mode is on, pressing the Jet Massage Button (C) will cause the filter
mode to turn off and the jet massage mode to turn on.
• Heating and jet function can not be activated at same time. When heating system
is working, pressing (C) will change heating mode into jet mode: heating and filtering
are shut down, jet system is activated. If you press (C) again, heating and filtering
mode will re-start.
• Pressing Filter Button (D) activates the filter system. This button turns the filter pump on
and off. The green indicator light will turn on when the filtration system is activated.
Note: When heating and filter functions are working at same time, pressing (D) will shut
down heating and filtering together. When (C) is on, filter and heating cannot be
activated, therefore (C) should be shut down first.
• Pressing the Heat Button (E) activates the heating and filtering system at the same time.
The green filter light and red heat light will be activated at the same time. The
Portable Control Unit does not stop heating until the current water temperature
reaches the set temperature indicated by the ‘blinking’ red light.
• When you press the Blower Button (C) the circulation pump and the heater will stop, as
a consequence the temperature on the display will decrease (due to no flow of water
between the Portable Control Unit and the spa). To regain heating functionality turn
the Blower Button (C) off and press the Heat Button (E). The circulation pump will restart
and the temperature will increase or the heating mode will restart automatically after the
water temperature drops 1°F/ 1°C (approx) below the set temperature. Max. heat
temperature: 104°F (39°C). Allow 24-48 hours to heat up your spa.
