4
Rinnai New Zealand
Super Ray Heat Shield Installation: 450-A
0-09
About the Super Ray Heat Shield
The Rinnai Super Ray heat shield acts a deflector/insulator when fitted to a Super Ray
W-Series heater. This has the benefit of reducing ceiling clearances, giving the owner flexibility
about where the Super Ray heater can be positioned.
For example:
the ceiling clearance for a Rinnai Super Ray WMA 6 reduces from m to 0.5 m with a heat
shield installed.
Constructed from stainless steel and heat resistant insulator board.
Heater Clearances with the use of a Super Ray Heat Shield
Super Ray W-Series
Model
Minimum Clearance from Wall
Bracket to Side Wall (A)
Minimum Clearance from Wall
Bracket to Ceiling (B)
6
m
0.5 m
4
m
0.6 m
40
m
0.6 m
48
m
0.6 m
Installer, please check wall and ceiling temperatures once fitted. Temperatures not to
exceed 65 °C above ambient as stated in NZS 56/AS560.
A
Front View - Side Wall Clearance
B
Side View - Ceiling Clearance
Angle of deflector is fixed and must not be altered. This is a safety feature.
Installer, please note:
Due to heat being deflected down and out, side
clearance extends to m. this differs to the side
clearance of a Super Ray without a heat shield which
is 0.5 m.
