background image

 

Rinnai New Zealand

Super Ray Heat Shield Installation: 450-A 

0-09

LIMItEd WARRANty

Please keep these instructions in a safe place for future reference.

RECORd ANd AttACH yOUR PROOF OF PURCHASE BELOW:

your Retailer:____________________________________________________

Name:_________________________________________________________

Address:_______________________________________________________

_______________________________________________________________

telephone:( _______ ) ____________________________________________

date of Purchase: ______  / ______  /  _________

tERMS ANd CONdItIONS

. during the 4 month period from date of 

purchase and subject to clauses  and 3 below, 
Rinnai New Zealand Limited (“Rinnai”) will, at 
its own discretion, either replace or repair any 
defective product at no charge to the customer.

. this warranty covers manufacturing defects 

only. this warranty will not apply if (for 
example) the product has been improperly 
installed or is otherwise installed contrary to 
manufacturer’s recommendations, or has been 
subjected to damage or abuse beyond that 
expected from conditions of normal use.

3. this warranty commences from the date of 

purchase. Proof of purchase is required at the 
time of any warranty claim.

 
the company is constantly improving its products 

and as such specifications are subject to change or 

variation without notice.

Rinnai brings you peace of mind 

with a  year minimum warranty.

Summary of Contents for Super Ray WMA 16









Reviews: