N-BW2 Networker Bridge (WIFI)
API-N-BW2
Issue 1.3 Page 7 of 48
2.3 Default Access Point State
The product label affixed to the N-BW2 appears as illustrated below:
This label identifies the unique serial number/default password embedded within the N-BW2. The serial number
is used to form the default SSID (
RinnaiABC123
in the example above) with the default password used as the
WPA pass-phrase (
1234567890
in the example above). When associated with the N-BW2 in this state, the client
device can only access the WIFI configuration mode described in Section 3. This default Access Point state is
reverted to:
1)
When the N-BW2 is switched on for the very first time.
2)
When the N-BW2 has not had user configuration settings saved to its internal memory.
3)
On power up when the AP button has been held pressed for at least 5 seconds.
4)
When the N-BW2 has been configured to operate in the Station state but the router it was configured
to associate with could not be located after 3 minutes. The N-BW2 will revert to its Default AP state
for 2 minutes before reverting back to the user configured Station state.
To ease installation a QR code is provided which when scanned provides the device serial number/default
password as follows (using the above label as an example):
ABC123_1234567890
Default Network Name (SSID):
RinnaiABC123
Default Security Key (WPA):
1234567890