
N-BW2 Networker Bridge (WIFI)
API-N-BW2
Issue 1.3 Page 6 of 48
2.2.2 Brivis Touch (N-C7) Type Networker
When a spare port is available on the Brivis Touch Interface Module this port can be used to connect the N-BW2
as it is pin-to-pin compatible with the corresponding connector on the N-BW2. In this case the 12VDC plug-pack
is not needed to power the N-BW2 – See FIG 2.2.2a.
FIG 2.2.2a: N-BW2 Connection to Brivis Touch System –
Using Interface Module Port
When no spare port is available on the Brivis Touch Interface Module then the N-BW2 must be powered by its
own 12VDC plug-pack and connected to the system as illustrated in FIG 2.2.2b.
FIG 2.2.2b: N-BW2 Connection to Brivis Touch System –
Without Using Interface Module Port