Rinnai HINRJ25B Installation Manual Download Page 6

Rinnai 

Split AC IM

OPERATION
DO NOT

 let the air conditioner run for extended periods when the humidity is very high or when 

doors or windows are left open. As this may result in an excessive operational loading and lead 

to product failure.

DO NOT 

cover or place articles on any part of this appliance.

DO NOT 

touch, operate or clean the air conditioner with wet hands. It may result in electric 

shock or product failure.

DO NOT 

insert hands or other objects through the air inlet or outlet while the appliance is 

operating. It may result in electric shock or product failure.

DO NOT 

place a heater or other heating appliances near this appliance, always ensure sufficient 

ventilation when using this appliance and a heating appliance at the same time. Failure to do so 

may result in product mis-operation.

Turn main power off before cleaning. Failure to do so may result in fire, electric shock, or product 

failure.

DO NOT 

use solvents, abrasives or harsh detergent to clean any part or surface of this appliance 

or spray water or allow liquids to enter the indoor unit. The enclosure of the appliance and remote 

control can be cleaned using a soft, damp cloth and a mild detergent.

NEVER

 touch the metal parts of the air conditioner when you remove the air filter. It may result 

in electric shock or product failure.

DO NOT 

leave flammable materials near the appliance. It may result in explosion or fire.

If there is excessive noise, smell or smoke coming from the appliance, turn the appliance off, 

isolate the power supply and contact a service agent. 

DO NOT

 operate the appliance if it has been submerged into water due to flooding, contact a 

service agent. Failure to do so may result in electric shock, fire, serious injury, or product failure.

This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their 

safety.
Children should be supervised to ensure that they 

DO NOT

 play with the appliance.

The air conditioning system is designed to achieve consumer comfort. It is 

NOT 

designed 

for commercial applications requiring a controlled atmosphere (i.e. computer rooms, food 

preservation, etc.)

DO NOT 

block the inlet or outlet of air flow. It may result product in failure.

DO NOT 

drink the condensate water drained from the appliance. This condensate is not potable 

and may present a health risk if consumed.

DO NOT 

expose people, animals or plants directly to the cold or hot discharge of the appliance. 

It may result in serious injury.

DO NOT 

mix the batteries for the remote control with other types of batteries or mix new batteries 

with used batteries. Failure to do so may result in product failure. 

STOP 

using the remote control 

if there is a battery fluid leak

.

OPERATION RANGE LIMITATIONS

The table below indicates the temperature ranges the air conditioner can be operated within.

MODE

Cool Mode

Heat Mode

Dry Mode

Room Temperature

> 17°C

< 27°C

> 17°C

Outdoor Temperature

-15°C ~ 52°C

-15°C ~ 24°C

-15°C ~ 52°C

WARNING

WARNINGS AND IMPORTANT INFORMATION

Summary of Contents for HINRJ25B

















Reviews: