When the Temperature Controller(s) is used in public applications, it should be installed
where it can not be adjusted by the public (i.e. a maintenance room or manager’s
offi ce).
The Temperature Controller(s) have default temperature settings for The Rinnai Water
Heater models. See page 18 for details.
44
Rinnai America
FF Models
I N S TA L L E R ’ S I N S TA L L AT I O N I N S T R U C T I O N S
Remote Controllers- General
The remote controls for the Rinnai Water Heater allow the customer to control the
functions of the water heater and to diagnose certain fault conditions.
Before installing the remote controllers, determine the most convenient location(s).
When deciding on the best location for the remote controllers, please consider the
following items:
1) Place the controllers out of reach of small children.
2) Avoid locations where remote controller(s) will become hot. (over the stove,
near the oven or a radiant heater.
3) Avoid direct sunlight. (The digital monitor can be diffi cult to read in direct
sunlight)
4) Avoid areas where remote controller(s) can be splashed with cooking water, oil
or sauce.
5) Remote controller(s) cables carry low voltage, 12VDC digital.
Remote controller(s) can be wired in series or in parallel depending on the
distance from the Rinnai Water Heaters to the controllers.
Every installation is different
Rinnai
Main Controller
Main Controller
Bath Controller
Bath Controller
Rinnai
Series
Parallel
