Front
door
Threaded
opening
Install second
door this side
Door handle
Magnetic
door stopper
Diagram 5.
T
R
O
L
L
E
Y
A
S
S
E
M
B
L
Y
9
9
Drawer back panel
Track insert
must be
positioned
to front
Diagram 4.
6.
Ignore this step for Buffet model.
Attach drawer track panels to both sides of top
panel refer
diagram 4.
Insert the bracket between
the securing screw and fold of top panel. Secure
firmly using the
1
/
4
" x
1
/
2
" phillips-head screws
and nuts.
7.
Install magnetic door stoppers to bottom shelf
and top panel.
See diagram 5
. Fix firmly using the
four (4)
1
/
4
" x
1
/
2
" phillips-head screws and nuts.
8.
Remove protective coating on the doors. Install
door handle to front door by using two (2) M4
x6 mm phillips-head screws provided.
See diagram 5.
9.
Before installing front doors, visually check and
ensure the threaded integral spacers of the bottom
panels are located in position on the hinge sides
of trolley.
10. Install either front door by inserting
1
/
4
" x
5
/
8
"
part-threaded bolt through the lower integral
spacer of front door, and then secure to the bottom
panel. Tighten securely. Align the upper spacer
of front door with the top panel and tighten
securely using
1
/
4
" x
5
/
8
" part-threaded bolt
provided.
11. Repeat the above step to install the other front
door.
12. Attach gas cylinder support to the wheel-side
trolley legs using two (2)
1
/
4
" x
1
/
2
" roundhead
screws provided.
See diagram 6
.
13. Install gas cylinder hook bracket using two (2)
1
/
4
"
x
1
/
2
" roundhead screws and wing nut provided.
Gas cylinder
hook bracket
Gas cylinder
support
Drawer
Drawer track
Diagram 6.