RinKmo EI06, Troubleshooting Manual

Page: 14 / 42

rinkmo.team@outlook.com
Page 14

Activity C |LED light is off, but unit is not heating.
（
the green light
on
）
This phenomenon is due to the fact that the water heater is not properly turned on
and the water heater is not operating normally.
Please follow the steps below
1. The circuit breaker is closed and energized, all the lights are on, the display is
also on, and it enters the standby state.
The power indicator, heating indicator and digital display are all on for 3 seconds for
self-test (the power indicator is bright green, the heating indicator is bright red, and
the digital display shows red 8888), except for the power indicator, heating indicator
and digital It turns off after 3 seconds of display (the power indicator is green, and
the heating indicator and the display are not finished.
2. First use, please open the water valve and press the knob. When you hear a click,
it means it is turned on, the heating indicator lights up in red, and the display screen
lights up. After a delay of 2 seconds, the water heater starts to operate. Turn the
family button to set and adjust the temperature.
3. If the water heater gently presses the switch, it still does not light up, and the
control board may be broken. Replace the control board.