92
IP addresses of the form _ _ _ . _ _ _ . _ _ _ . _ _ _ go under the first three
columns for Network, Subnet Mask, and Router. A number of the form
_ _ _ goes in the fourth column for Hops. Each _ _ _ is a number
ranging from 001 and 255.
A Static Routing Table is used to designate the exact route a
packet will travel through the network.
The column for Network is for a network that is reachable
locally by the selected router without it having to route
through ISDN.
The column for Subnet Mask is for a subnet mask
corresponding to the above network.
The column for Router is for the first router on the path a
packet will take to reach the network described above.
The column for Hops represents how many routers a packet
will pass through to arrive at the network described above.
Once you’ve made a Static Routing Table, you are ready to
go to Step 4.
Step 4: Select Route IPX Traffic to be on or off.
The default of Route IPX Traffic is off.
Route IPX Traffic allows your router to route Novell IPX
packets.
To configure IPX routing, use the mouse and click on
CONFIGURING YOUR ROUTER
Summary of Contents for ISDN Router ISDN
