manualshive.com logo in svg

RinG-MASTER RM5000EX, Operation Manual

Share
Download
RinG-MASTER RM5000EX Operation Manual Download Page 9

September  2018                                   Operations Manual                                    RM5000EX 

ALARM

Long DC shift (1sec<) will send ALARM to the call number programmed for direct access.

LINE SUPERVISION

Line Supervision is activated with privilege #10. The audio lines from the intercom is 
monitored for shorts, open, powerfail  and will send  FAULT to the call number programmed 
for Direct Access.

TWO BUTTON DC SHIFT SUB-STATION

Direct Access and Direct Dial #1 are programmed to activate this feature. 
Short DC shift(<1sec) will send CALL to the call number for Direct Dial #1. 
Long DC shift (1sec>) will send ALARM to to the call number programmed for  Direct Access. 
Zero Volt on the audio line will send FAULT to the call number programmed  for Direct 
Access.
Device Type = sub 
Program in Que = none

REMOTE CONTROL

DTMF tones may be sent from one intercom station to the other for remote control. The keypad on

the station sends standard telephone dialing tones (CCITT). This is mainly used for electric door-lock 
release and for dialing out to the public telephone network (PTT). The microphone mute function must 
be activated while pushing a number key to disable conference add-on . When the B-subscriber 
(receiver of the call) is programmed with the privilege “DTMF Device”  then the number keys may be 
activated without pushing the microphone mute key. 

CAMP ON BUSY EXTENSION

The caller may camp-on to a busy extension for 20 seconds (programmable subscriber timer), 

after which the call will be automatically canceled. If the called party becomes free within this time, the
connection will be established with warning tone to both parties. 

PRIVACY

The stations privacy switch controls the privacy status. When the B-subscriber is in privacy both 

stations gets the ringing tone. The B-subscriber may accept the call by pressing the 0-button  within 15 
seconds (programmable subscriber timer).  This operation is valid when the B-subscriber is not using 
personal queue.

Page9 

Ring-Master

Summary of Contents for RM5000EX


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands