TTL Settings
<TTL> mode <M> mode
Press
button on the TS-4 transmitter to switch between <TTL> mode and <M> mode..
In TTL mode, when the shutter on the camera of which the TS-4 is mounted to is pressed exposure is automatically controlled.
TS-4 wireless trigger must be used in order to operate the TTL mode.
*All operations must be done on the transmitter of the TS-4 controller.
Settings will not be applied when operating on the unit itself.
8 F-STOP in TTL mode, 7 F-STOP in manual mode.
i-Flash TTL from 1/1 full power to the lowest output of 1/128 with an increment of 0.1 F-Stops and a total of 70 levels
in manual mode.
…when decreasing output power:
…when increasing output power:
TTL / M settings
