Reset Settings
(Before resetting)
(After resetting)
To reset i4 TTL, press
button for 2 seconds or longer.
All settings for group, channel, exposure compensation, sync and flash output are reset.
This equipment comes built in with a Li-ion battery. Below are instructions on proper battery handling.
1.
Characteristics and usage of battery
This equipment comes with a 11.1V 4.4A battery.
Charge battery with charger that comes with the package before use.
One full charge takes approximately 3.5hours, providing up to 400 flashes at maximum output. Li-ion battery performs better after more than 10 times of full charge
and discharge. According to frequency of usage, battery capacity may increase in the beginning and gradually decrease before its life cycle comes to an end.
A fully charged battery may be stored up to 6 months. Keeping a discharged battery for a long period may affect its performance. To maintain performance, charge
battery within 3 months after use.
The battery life cycle is approximately 300 cycles. A drastic drop in flash brightness suggests a change of battery is needed. Contact Rimelite for replacement battery.
A change in temperature outdoors may affect the battery. Life cycle of battery may vary under
normal temperatures of 10
°
C to 45
°
C; please be aware of usage under
low and high temperatures outside of normal temperature range.
A drastic drop of the battery capacity may occur below 10
°
C and the battery may fail to operate
under 0
°
C.
