User manual
Baby Kangoo RB202
25
EN
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the following:
Appendix #1 - Receiver Specifi cations
Problem
Solution
There is no picture from
a Camera.
Check all connections to the Camera. Make sure the adaptor is plugged in.
Make sure that the Cameras and Receiver are both ON.
Make sure that the camera is in range of the Receiver.
If using the battery adaptor, try replacing the Batteries.
The picture is dropping
Move the camera closer to the receiver.
Try repositioning the camera, receiver or both to improve the reception.
There are problems with
the Audio.
Ensure that the volume on the TV is ON.
Make sure that there is sound within range of the Camera Microphone.
If the unit emits a loud screeching noise (feedback), move the camera or
receiver farther apart.
The Picture is or has
become Choppy
The picture may become choppy when experiencing a lower frame rate (i.e.
10 frames per second vs. a higher 20 frames per second).
Try moving the camera closer to the receiver. Remove obstructions between
the Receiver and Camera.
The Picture appears to
be grainy when using
AV out function to
view on a large screen
TV/Monitor
The purpose of the AV output is for convenience only. When using with large
screen TV/Monitor, the picture might be grainy as the camera limits video
resolution to VGA (640x480 pixels). This is not a product defect.
For best performance use with TV/Monitor PIP (Picture in Picture)
function.
Check your TV/Monitor product manual to see if this feature is available on
your TV/Monitor.
View video on a smaller screen TV/Monitor.
Receiver
Receiving Frequency Range
2.400 GHz~2.4835 GHz
Data Rate
3 Mbps
Receiving Sensitivity
-88 dBm
Demodulation Type
GFSK con FHSS
Resolution
H: 320 V: 240
Viewing Angle
H: 50° V: 50°
A/V Output / Resolution
QVGA 320x240 / 20 FPS
Alarm Sensitivity
80 dB ±10% (1M)
Power Requirement
5V DC ±5%
Power Consumption
400 mA Máx. without charging, 800 mA with charging
Operating Temp Range
14°F ~ 140°F
-10° ~ 60° C
Operating Humidity
0% ~ 85% RH
