Amigo I
I
4
110654_G
b. If the disc is not centered side-to-side on
the print pad, align the printer side to side.
i. Loosen
the
side to side screws
.
ii. Slide
the
printer
, not the drawer, until
the side edges of the disc and printer
pad are aligned.
iii. Tighten
the
side to side screws
.
Side to Side Screws
Front to Back
Alignment Screw
c.
Using either the T25 Torx driver or the
5/32” Allen wrench, turn the
front-to-back
alignment screw
until the disc hangs over
the edge of the print pad by 0.010” –
0.015”.
Print Pad
5. Raise
the
lift arm
to the top the unit.
6. To close the print drawer, press the
printer button
.
7. To release the disc from the gripper, press the
disc release button
.
Tip:
Place your hand under the disc to catch it.
8. Close
the
door
.
