Amigo II
PrismPlus printer
To align your Prism
Plus
printer, refer to the following instructions.
Required tools:
y
T 25 Torx screwdriver
y
5/32” Allen wrench
1. To power on the Amigo II, press the
PrismPlus power switch
and the
Amigo II power switch
.
2. Wait for the unit to complete the initialization.
3. Prepare the unit for alignment.
a. Manually move the
lift arm
to the top of the
Amigo II.
b. To place a disc in the lift arm, press the
disc
up into the
lift arm
while pressing the
disc release button
.
c.
To open the print drawer, press the
printer
button
.
d. Close and re-open the door. This releases
the lift arm so you can manually move it.
Lift
Arm
Gripper
Disc Release Button
4. Align the printer.
a. Slowly move the
lift arm
down until the disc just touches the
print pad
.
Printer
Button
Lift
Arm
Side to Side
Alignment
Print
Pad
Holding Pins
110654_G
3
