Allegro 100 Disc Publishing System
Service Manual
Rimage Corporation
Page 41
Snap
Wires Behind
Pinched
Spring
23.6
When reassembling carrier be sure to snap end of quad sensor carrier bracket onto tab on
frame before replacing screw. Be sure to route alignment sensor wires behind tab before
replacing 4 screws securing both frames together. Be sure bottom corners of carrier flex pc are
pinched between both frames.
23.7
Gripping spring with tweezers, slide it in between lower capture lever and carrier base. Hold
spring in center and snap lower capture lever back into place while removing tweezers. Spring
should remain captured between parts. Be sure spring is centered and sitting straight up and
down.
Summary of Contents for Allegro 100
Page 1: ...Allegro 100 服务手册 ...
