Allegro 100 Disc Publishing System
Service Manual
Rimage Corporation
Page 40
Pry to Remove
Press to Attach
Fold
Tabs
Fold
23.4
使用一个平
头
螺丝
刀
将传感器
撬
出并将其从
方形
的支架中弹出
来
,
Use a small flathead
screwdriver to pry and pop sensor out of quad sensor carrier bracket. Press sensor from new
carrier flex pc into bracket until it snaps into place. Be sure sensor is snapped properly in place
so that both tiny round tabs are in notches on bracket (2
nd
picture).
使用小型平头螺丝刀将传感器撬出并从方形传感器支架中弹出。
将传感器从新的
载体
flex pc
中压入支架,直至其卡入到位。
确保将传感器正确地卡入到位,以使两
个小圆形卡舌都位于支架上的凹口中(第二张图片)。
23.5
Fold and crease carrier flex pc in locations shown. Place holes onto tiny tabs on bracket. Plug
alignment sensor in. Place new carrier flex pc into frame.
Summary of Contents for Allegro 100
Page 1: ...Allegro 100 服务手册 ...