Rima ONGAS MEGA 05, Installation Manual

Page: 53 / 60

53
7.2.Cleaning of the Modulated Fan, Venturi and the Burner
Remove the electrical connections from the fan, gas valve and the
electrodes.
1. Remove the bolts on the exterior of the burner.
2. Clean the Premix burner with an air gun (the distance between the
nozzle and burner shall be about 1 cm and the pressure of the
compressed air shall be 2 – 4 bar).
3. Remove the dusts on the fan and the burner.
4. Clean the venturi pipe with a plastic brush and air.
5.Install all parts you have removed again; check the position of the gasket plate between the fan and
venturi is correct.
7.3. Cleaning of the Siphon
It shall be disassembled, the sediment collected inside shall be cleaned and then it
shall be reassembled; and this process shall be made into a routine.
8.WARRANTY AND COMMISSIONING
Warranty Conditions
1) Warranty period starts with the delivery date of the goods. Warranty period for condensing
boilers is two (2) years.
2) The goods are under warranty cover as a whole including all of their parts.
3) In the event that the goods are found to be defective, the consumer shall have the right to ask for the
implementation of one of his/her rights specified in Article 11 of the Law No. 6502 on Consumer
Protection:
a) Returning from the contract, b) Requesting a discount from the sales price, c)
Requesting free repair, d) Requesting the replacement of the sold goods with an undamaged
equivalent.
4) If the consumer chooses the right for free repair amongst these rights , the seller is obliged to
repair or have the product repaired without charging any fee under the name of labor cost, replacement
part cost or any other name. The consumer may also exercise the right for free repair against the
manufacturer or importer, too. The seller, manufacturer and importer are jointly responsible for
exercising of this right by the consumer.
5) If the consumer uses the right to repair free of charge , the consumer may request the return of
price of the goods, price reduction at the ratio of the defect or the replacement of the goods with
an equivalent free of defect
from the seller in the following cases;
- Repeated failure of the goods within the warranty period,
- Exceeding of the maximum time allowed for repair,