Rikon Power Tools 63-100, Operator'S Manual

Page: 9 / 16

9
ASSEMBLY
2. Fold the top edges of the paper filter bag
down inside of the cartridge filter. FIG. 2.
FIG. 2
3. Push the filter assembly down onto the motor
body, making sure that it is fully seated and
secure. FIG. 3.
FIG. 3
FIG. 4
4. Lift and install the lid and filter assembly on
top of the canister body. Secure the lid to the
body with the band strap clamp. FIG. 4.
5. Attach one end of the flexible dust hose to
the machine inlet, and secure it in place with the
clamp supplied. FIG. 5.
Hose
Clamp
Hose
Clamp
IMPORTANT TIPS ON USE:
• Always ensure that the end of the 4” diameter flexible hose is not completely covered or blocked,
or the machine may be ‘pulled’ suddenly towards the end of the hose.
• Completely covering or blocking the end of the 4” dust hose will restrict airflow to the motor,
which may result in overheating and damage to the motor. In addition, the increased pressure may
cause damage to the canister body.
• The 4” dust hose is intended mainly for connection to woodworking machinery to collect dry
sawdust and shavings.
It is not to be used for water clean-up.
• If the 4” dust hose is used for cleaning machinery or around the shop, make sure that the
opening is held at an angle to the surface to be cleaned. Do not allow the hose to get stuck to
the surface that is being cleaned. Restricted airflow to the motor may result in overheating and
damage to the motor. In addition, the increased pressure may cause damage to the canister body.
FIG. 5
BAND STRAP
CLAMP