7
SPECIFIC SAFETY INSTRUCTIONS FOR AIR FILTRATION SYSTEMS
This machine is intended for the capture of airbourn particles to keep the air clean in your woodworking shop.
The permissible room dimensions must be observed (see Technical Specification). Any other use not as specified,
including modification of the machine or use of parts not tested and approved by the equipment manufacturer can cause
unforeseen damage and invalidate the warranty.
ATTENTION:
Use of this air filtration system still presents risks that cannot be eliminated by the manufacturer. Therefore,
the user must be aware that all machines are dangerous if not used with care, and all safety precautions are adhered to.
1. Do not operate this machine until you have read all of the following instructions.
2. Do not attempt to operate this machine until it is completely assembled.
3. Do not turn ON this machine if any pieces are missing.
4. If you are not familiar with the operation of the machine, obtain assistance from a qualified person.
5. Make sure that the System is secured in a horizontal position if hanging from the ceiling or positioned on a work surface.
6. Do not place System near an open ignition source - open flames, pilot lights, or grinding areas producing sparks.
7. Do not expose System to to rain or dampness.
8. Use System for filtering wood dust only. Not for use filtering sheet rock dust, silica, lead paint dust,asbestos, biohazards,
smoke, toxic fumes, spray paint or flammable liquids.
9. Do not use without filters in place.
10. Never duct a machine directly into the air filtration system.
11. Do not leave the System running unattended.
12. Always make sure the power switch is in the OFF position prior to plugging in the machine.
13. Always, disconnect (unplug) and make sure the power switch is in the OFF position when doing any assembly, setup,
or when cleaning or changing filters.
14. Always wear a dust mask when cleaning or working near an air flitration system.
15. This machine must be properly grounded.
16. Always keep your face and hands clear of moving parts such as impellors and fans.
Contents of Package
Unpacking and Checking Contents
Carefully unpack your air filtration system from its carton and check to see that you have all of the
following items. If any parts are missing or broken, please call RIKON Customer Service
(877-884-5167) as soon as possible for replacements. Do not turn your machine ON if any of these items are
missing. You may cause injury to yourself or damage to your machine.
A . Air Filtration Unit
B . Remote Control
C . Hardware Bag
D . Manual
A
B
D
62-450
www.rikontools.com
62-450M1
Air Filtration System
450 CFM
Operator’s Manual
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email [email protected] or call toll free at (877)884-5167
Record the serial number and date of purchase in your manual for future reference.
The serial number can be found on the specification label on the rear of your machine.
SAFETY INSTRUCTIONS
C
