13
Check and Replace the Fuse (Fig. 12)
1. Unplug unit from the receptacle or other
outlet device.
2. Using a Phillips head screwdriver turn the
fuse cover
Fig.12,
(A) counterclockwise to
remove it. Carefully pull the fuse away from the
control panel.
3. Insert a new fuse (5 Amps, 125V) in the fuse
cover and reinstall into the control panel. Turn
the fuse cover clockwise to re-install it in the
panel.
Risk of fire. Replace fuse only
with 5 Amp, 125 Volt fuse.
Replacing th Remote Control Battery
(Fig. 13)
1. Open the rear battery compartment panel
on the remote control by turning the battery
cover counter clockwise with a coin or flathead
screwdriver.
2. Remove the old battery.
3. Install a new “CR2025” battery positive (+)
side up according to the picture shown inside of
the battery cover.
4. Close the battery compartment.
Fig.12
Fig.13
A
Battery Compartment
MAINTENANCE
Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery
is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little
as 2 hours.
Always completely secure the battery compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
The cells shall be disposed of properly, including keeping them away from children; and even used
cells may cause injury.
