GETTING TO KNOW YOUR MACHINE
CONTENTS OF PACKAGE
7
Model 20-108H Jointer is shipped in two boxes.
Unpacking and Clean-up
1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to make sure
that all of the items are accounted for, before discarding any packing material. Place parts on a protected surface
for easy identification and assembly. If any parts are missing or broken, please call RIKON Customer Service (877-
884-5167) as soon as possible for replacements. DO NOT turn your machine ON if any of these items are missing.
You may cause injury to yourself or damage to the machine.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces with ordinary house hold type grease or spot remover. Do not use; gasoline, paint
thinner, mineral spirits, etc. These may damage painted surfaces.
4. Apply a coat of paste wax to the tables to prevent rust. Wipe all parts thoroughly with a clean dry cloth. Be careful
when working, as the jointer insert knives are sharp and may cause injury if touched.
5. Set packing material and shipping carton aside. Do not discard until the machine has been set up and is running
properly.
J
SEE PAGES 22 thru 26
FOR THE
PARTS DIAGRAMS AND
PARTS LISTS
A Outfeed Table Adjustment Knob
B Outfeed Table
C Fence
D Fence Lock
E Fence Adjustment Knob
F On / Off Switch
G Infeeed Table
H Infeed Table Adjustment Lever
I Cutterhead Guard
J Cabinet Stand
A
B
D
E
F
C
G
H
I
J
