11
ASSEMBLY
FIG. 8
FIG. 9
FIG. 10
INSTALLING THE FENCE
CONTINUED FROM PAGE 10
2. Attach the Fence Mounting Bracket to the rear of
the jointer body by using the four M8 x 45mm Allen
bolts. FIG. 8.
3. Next locate the Fence Slide Bracket Assembly and
rest it on top of the Fence Mounting Bracket.
Secure using two M8 x 20mm Allen bolts and two
8mm flat washers. FIG. 9.
4. Mount the Fence Angle Bracket (A- Fig. 9) to the
Fence Slide Bracket Assembly by using two M8 x
25mm Allen bolts and two 8mm flat washers (B-Fig.
9).
NOTE:
The two M8 x 25mm Allen bolts and two 8mm
flat washers are pre-installed in the Fence Angle
Bracket.
5. Mount the Fence to the Fence Angle Bracket
Assembly by using two M6 x 20mm Allen bolts. FIG.
10.
6. Thread the Fence Tilt Handle on the rear of the
Fence. FIG. 11.
NOTE
: There are two threaded holes on the rear of
the Fence. Install the Fence Tilt Handle in the
threaded hole that is most comfortable and
convenient for you.
THE MACHINE MUST NOT BE
PLUGGED IN AND THE POWER SWITCH MUST BE IN
THE OFF POSITION UNTIL ALL ADJUSTMENTS ARE
COMPLETE.
8MM x 20mm Allen
Bolt (x2)
8MM Flat Washer (x2)
6MM x 20mm Allen bolt (x4)
FIG. 11
Fence Tilt Handle
Threaded Hole
8MM x 45mm Allen
Bolt (x4)
A
B
