6 How to Operate in SETUP MODE
48 / 87
6
How to Operate in SETUP
MODE
SETUP MODE is used to set how to calculate calorific value and density, output conditions for 4 - 20 mA
signals, operating conditions of the contacts, etc with the OHC-800.
In this mode, the calorimeter stops measurement, enters the "FUNCTION CHECK" state, and outputs 4 - 20
signals according to the user-specified conditions.
(For information on changing the output conditions, see Section 6.2.3, "4 - 20 mA condition settings (4 - 20
mA SETTINGS).")
To enter SETUP MODE, display the MODE CHANGE screen while in MEASURING MODE, move the
cursor (black bar) using the
▲▼
keys, select "SETUP MODE," and press the SET key to confirm it. Then,
the password input screen is displayed, so enter the password (one character after another) using the
▲▼
+ SET keys.
The password is factory-set to "00000." For information on how to change the password, see the SETUP
MODE described in Section 6.2.13, "Password change (PASSWORD SETUP (SETUP MODE))."
MODE CHANGE screen
Password input screen
