|3
EN
2
1. INTRODUCTION
Our congratulations for having purchased a quality product�
To ensure a trouble-free functioning of your appliance we
recommend you to thoroughly read through the present instructions
and to strictly observe the suggestions contained herein at all times�
By cleaning and servicing your appliance regularly and expertly you
will ensure a long-lasting functioning over many years�
RIKA is always ambitious to provide an excellent service� Have a
good time, enjoying the cosy warmth of your RIKA stove as often as
you wish�
RIKA Innovative Ofentechnik GmbH
2. FIRST STEPS
Note
Manipulations on hardware components may only be performed
by a trained expert dealer or our customer service� Inappropriate
handling of these parts will void contractual and legal warranty
claims!
Note
The appliance may only be put into operation if fully assembled!
General view of interfaces
External request
Q
External room thermostat*
Q
Contactor (e�g� exhaust hood)*
* remove cable bridge and connect a 2-pin cable with a section
between 0�5 and 0�75mm
2
instead�
It will take approximately 1 minutes for your stove to shut down after
receiving an external shut-down request�
Note
Operation is not possible
unless either the cable bridge, or an
external request (e�g� an external room thermostat) are connected�
The external request has priority over all operating modes
(MANUAL / AUTOMATIC / COMFORT)�
Serial interface
Q
RIKA room sensor/ RIKA radio room sensor (available on request)
Q
RIKA GSM Control (available on request)
USB connection
Q
RIKA firenet (available on request)