18
Pressure sensor
Pressure sensor
Timeout
The pressure sensor can not achieve the minimal set pressure��
Check the stove for tightness (firebox door, cleaning lid), for
disturbing factors in the installation room (kitchen hood,
windows closed,���), as well as the flue�
Pressure sensor
Not connected or
cable broken
The connection to the pressure sensor has been lost�
Further operation is not possible, please inform customer
service�
Pressure sensor
Short circuit
A short circuit has occurred in the area of the pressure sensor�
Further operation is not possible, please inform customer
service�
Pressure sensor
Not calibrated
The calibration state of the pressure sensor is invalid�
Follow instructions on the screen to restore the calibration
state�
Limiter
Limiter
Cable bridge
Not connected or
cable broken
The cable connection has been lost�
Further operation is not possible, please inform customer
service�
Limiter
Stove overheated
Heat accumulation inside the appliance due to insufficient
convection�
Allow the stove to cool down and disconnect it from the mains�
Check if all convection air openings are free�
Depending on model:
Q
unblock / press the safety temperature limiter on rear side
of stove
Q
check the operation of the convection air fan in the
CONTROL MODE
state�