RIKA REVO TOUCH, Operating Manual

Page: 13 / 24

|
13
EN
12
6. ASSEMBLY/DISMANTLING STONE AND OPTIONS
Note
Only work on the unit when the mains plug has been disconnected and the
stove has cooled completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to fall into
the pellet container – they can block the screw conveyor and damage the
stove.
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments.
Select soft bases to prevent scratches to your living space furniture and
stove panels.
Disassembly of the front side casing
Remove the convection fins by lifting slightly. The convection fins are only
suspended.
Now remove the upper hexagon screw on the front stone holder and loosen
the bottom two.
You can now lift the front stone.
Now remove the 8 hexagonal screws used to attach the two side stone holder.
You can then remove the side stones.
Install the removed parts in reverse order.
Disassembly of the rear side panel
Open the container lid.
Remove the 2 vertical hexagonal screws used to attach the right rear side
panel.
You can now lift the right rear side panel.
Install the removed parts in reverse order.
The disassembly of the left rear side panel is analogous to removing the right
rear side panel.
#8
#8
#8