RIKA REVO II PGI Operating Manual Download Page 17

|17

EN

16

8. MAINTENANCE

The frequency with which the stove requires cleaning and the 
maintenance intervals depend on the fuel you use� High moisture 
content, ash, dust and chips may more than double the maintenance 
required� We would like to point out again that only tested and 
recommended pellets may be used as fuel�

Tip

Wood as fertiliser - the mineral content of the wood remains in the 
combustion chamber as ash as a residue of the combustion� This is 
an excellent fertiliser for all plants in the garden; it is a completely 
natural product� The ash should be stored first and slaked with 
water�   

Note

We recommend at least once a year to have all maintenance 
carried out by your RIKA dealer�

Note

Ash may contain embers – only place ash in steel sheet containers!   

Open the combustion chamber door

To open or close the combustion chamber door use the included key� 
This key can be stored on the back of the stove when not in use�

Empty the ash drawer

Empty the ash drawer regularly� The ash drawer is simply pulled 
forward with the combustion chamber door open�

Cleaning the flame temperature sensor

Remove the dust deposits from the sensor at regular intervals� Use a 
clean cleaning cloth or newspaper�

Cleaning of the burn pot - daily

Make sure that the air vents are not blocked with ash or clinker� 
Remove the clinker using the supplied brush and vacuum the burn 
pot� The burn pot can be easily cleaned inside the stove� After 
removing the pot the area underneath can be vacuum-cleaned�

Do not damage the ignition when cleaning with the brush� Vacuum 
out the pipe of the ignition�

Note

Clean the fire trough regularly� Only clean when cold, when embers 
are extinguished!   

Note

If the stove is heated in continous operation, it must be cleaned 2x 
within 24 hours� FIRE HAZARD!   

Cleaning the door glass

If necessary 

The viewing window becomes coated in the case of solid fuels, 
particularly with the very fine ash of wood pellets, light or dark 
depending on the pellet quality (especially with low output)� The 
glass can be cleaned best with a moist cloth� Stubborn dirt can be 
removed with a special cleaner available from your stove dealer� 
Usual cleaners containing acid or solvents can be too harsh and 
damage the glass�

Cleaning painted surfaces

If necessary 

Wipe the painted surfaces with a damp cloth, do not scrub� Do not 
use solvent-containing cleaners�

Summary of Contents for REVO II PGI

























Reviews: