14
6. ASSEMBLY / DISASSEMBLY SIDE PANELS
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled down completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments� Select soft bases to
prevent scratches to your living space furniture and stove panels�
Disassembly rear side panel
Open the pellet container lid� In this position it remains open�
Remove the 2 hexagonal screws of the rear side panel��
Tilt the rear side panel slightly outwards and disconnect the display
cable� Lift the panel to remove it�
Disassembly stones
Loosen the 4 screws of the convection fins�
Push the convection fins backwards and lift them straight up�
Open the combustion chamber door�
Remove the 2 hexagonal nuts including washers� Now you can pull
the stone forward with caution�
#8
#3
#13