Page 14 of 24
The room set temperature can be changed from 0 to 220°F using “+” and “-“.
The new value is used immediately for control. If the room temperature
reaches the room set temperature, the indicator for the current room
temperature extinguishes.
Upon reaching the room temperature, the stove is switched off. If the room
temperature falls below the room set temperature by 4°F, the stove is re-
started and remains in operation until the room set temperature is reached
again.
Press
“ENTER”
twice
to set the pellet stove to the automatic mode (TM mode)
and the display shows:
IMPORTANT:
The clock symbol (colored red) indicates automatic mode.
“70°F” indicates an example room set temperature.
“68,5°F” is the current room set temperature.
The room temperature set value is determined by the programmed value
“AUTOM TEMP ON” and in cooling operation by “AUTOM” TEMP OFF”. This
value can also be changed temporarily using “+” and “-“ and will be maintained
until the end of the current heating interval.
If the “AUTOM” TEMP OFF” value is programmed to OFF the following
indications appear outside of the programmed heating times:
The clock symbol (coloured red) indicates the automatic
mode.
The symbol indicates that the control is at standby.
“OFF” indicates that the pellet stove is switched off and is
waiting for anti-freezing operation or for the next
programmed heating interval.
70°F
TEMP.
68.5°F
OFF
