Page 17 of 24
Start automatic operation (TM mode)
If automatic operation is selected on the display and the programmed heating
time begins, the control starts the heating operation.
The following alternating indication appears on the display:
„START“ indicates start.
The number below indicates the remaining time for the start procedure in
minutes (here 21).
On completion of the start–up cycle the following appears on the display until
the room set temperature is reached:
The clock symbol (colored red) indicates the automatic
mode.
70°F indicates an example room set temperature.
69.5°F is the current room temperature.
Note:
The heating program runs through automatically and can be interrupted by the
user by changing (ENTER key) the operating mode to “SB” (standby). In this
case the shut down (see “EXIT”, below) is run
completely
.
If during the start phase the device is disconnected from the outlet (e.g. power
outage) and then re-connected to the mains, the start-up cycle is initiated from
the beginning again.
START
21 MIN
70°F
TEMP.
6
9.5°F
70°F
TEMP.
69.5°F
