Rigol RSA5000 Series, User Manual

Page: 179 / 204

Chapter 6 System Function RIGOL
RSA5000 User's Guide 6-7
Security Clear
Press this key to perform the security clear function. This function includes the
following operations:

Deletes all the f iles that users have saved, including the state f iles, trace state
f iles, screen f iles, measdata f iles, and limit f iles saved by users in all modes.

Executes the factory resetting operation.
Language
RSA5000 supports multi-language menu, Chinese and English built-in help and
pop-up messages.
Press this key to select the desired display language.
Settings
1. Pow er Sw itch
Sets whether the power switch on the front panel is effective or not.

Default: When the analyzer is powered on, press the power switch on the
front panel to start up the analyzer.

Always: When the analyzer is powered on, it starts automatically.
2. Beep Sw itch
Turns on or off the beeper.
3. Volume
After you turn on the beeper, you can press this key to adjust the volume of the
beeper.
4. User Key
Def ines an associated function for the
User
key on the front panel. The
def inition method is as described below. After that, pressing
User
in any
operation interface can quickly enable the def ined function.

Press
User Key
to select "On";

Open the function menu that needs to be def ined. For example, press
System

Display

Display Line
;
Press
User
and the def inition is f inished. At this time,
User Key
turns off
automatically.
5. SCPI Display
When you use the SCPI commands to control the instrument remotely, turning
on the SCPI Display will go to the specif ied menu of the corresponding
command; turning off the SCPI Display will not go to the specif ied menu.
www.valuetronics.com