Installation
Guide
RIGOL
3
4.
Secure the side beam fasteners to the
cabinet by using four M6 screws and
four M6 nuts.
5.
Attach another two side beam
fasteners to the back ends of each
rail respectively, as shown in the
figure below, and then secure them
with four M4 pan head screws. Use
four M6 screws and four M6 nuts to
secure the side beam fasteners to the
cabinet.
6.
Attach Connecting Plate A to the left
side of Instrument A and attach
Connecting Plate B to the right side of
Instrument B, then secure them with
four M4 countersunk flat head screws.
7.
Connect the two instruments by
joining Connecting Plate A with
Connecting Plate B.
Instrument A
Instrument B
Instrument B
Connecting Plate A
Connecting Plate B
Instrument A
Installation
Guide
RIGOL
4
8.
Place two retaining brackets onto the
connecting positions of the rear panels
of the two instruments, and then
secure the retaining brackets with four
M4 pan head screws.
9.
Attach the left fastener to the left side
of Instrument B, and secure it with
two M4 pan head screws.
10.
Attach the filler panel to the right side
of Instrument A, then secure it with
two M4 pan head screws.
11.
Attach the right fastener to the other
side of the filler panel, and secure it
with two M4 pan head screws.
12.
Place the assembled instruments and rack onto the bottom plate. Then, secure the
left and right fasteners to the cabinet by using four M6 screws and four M6 nuts.
-End-
Instrument A
Instrument B
Instrument A
Instrument B
