RIGOL
DM3068 Quick Guide
5
Reading Hold: the backlight blinks; the multimeter obtains a stable reading
and displays.
4.
Single Trigger/Local Mode
Pressing this key during the front panel operation will cause the multimeter
generate one reading or specified number of readings (S NO.) and then wait for
the next trigger. Whatever, this key is also an access to local mode from remote
control.
5.
Power Button
Turns on or off the multimeter. Users can enable or disable this key as required.
Press
System
Cfg
Switch and select On or Off.
6.
Measurement Function Keys
Basic Measurement Keys
DC Voltage Measurement (DCV)
AC Voltage Measurement (ACV)
DC Current Measurement (DCI)
AC Current Measurement (ACI)
Resistance Measurement (OHM)
Capacitance Measurement (CAP)
Continuity Test (CONT)
Diode Test (DIODE)
Frequency/Period Measurements (FREQ/PERIOD)
Any Sensor Measurements (SENSOR), such as DCV, DCI, 2WR, 4WR,
FREQ, TC (thermoelectric couple), RTD (resistance temperature
detectors), THERM (thermistor).
Common Function Keys
Quickly save or recall at least 10 groups of instrument settings.
Secondary Function key
Enables the dual display.
Quickly saves the current instrument configuration in connection
with
.
Quickly enters the setting interface of relative measurement.
Summary of Contents for DM3068
