Rigol DG800 Series, User Manual

Page: 106 / 148

RIGOL Chapter 2 Front Panel Operations
2-76 DG800 User's Guide
Tap the desired character, and the selected character will be displayed in the
filename input area. Use the same method to input all the characters of the
filename. You can also tap
the delete the unwanted characters in the
filename input area.

Input Numbers
Tap
in the filename input interface to switch to the numbers and
symbols selection interface, as shown in the following figure. The input
method is similar with that of the English input.
Figure 2-20 Filename Input Interface (Numbers)

Input Chinese
Tap
in the filename input interface to select Chinese input method
(CH is highlighted). Note that if the current interface is number input
interface, tap
to switch to English input interface. Then, select
Chinese input.
Figure 2-21 Filename Input Interface (Chinese)
Tap the desired character, and the selected character will be displayed in
Filename Input Area Pinyin Input Area Chinese Character Display Area